Valentin Dynacode-II Thermal Transfer Coder

Home > Product Coding > Valentin Thermal Transfer Coders > Dynacode-II

Advanced thermal transfer coder range with selectable continuous or intermittent operation and colour touchscreen controller. Three print widths are available - 53, 107 and 128mm all in either right or left-hand configuration. The touchscreen controller provides an intuitive operator interface with icon-driven controls for adjusting settings and stand-alone operation.

  • Dynacode-II print unit
  • Continuous bracket system
  • Colour touchscreen controller
  • Flexible packaging films

Flexible design

All Dynacode-II printers can be configured to run in intermittent or continuous print mode allowing easy movement between packaging machines. The 7-inch colour touchscreen controller provides a WYSIWYG preview of the print message for quick verification of print data.

Interfaces

As standard, USB, Ethernet, serial and parallel interfaces are included. Stand-alone operation is available using a memory card and the touchscreen controller.

High-throughput printing

With a maximum ribbon length of 900m and a maximum print speed of 800mm/sec, Dynacode-II printers are well equipped for printing in high-volume environments. A ribbon-remaining indicator is provided so ribbon changes can be planned, and for very high volume applications, a spare ribbon cassette can be pre-loaded for changing in seconds.

Ribbon saving

All Valentin thermal transfer coders have ribbon saving as standard with typically 1mm utilisation between prints.

Software

Supplied with Labelstar Office LITE as standard for simple printing tasks. For more advanced requirements, Labelstar Office Basic, Labelstar Office Professional and the NiceLabel 2017 software range are also available.

Print width:
53, 107 and 128mm models
Max. print length intermittent:
75mm
Max. print length continuous:
6000mm (53mm wide models); 3000mm (other models)
Resolution:
300dpi (12 dots/mm)
Print speed intermittent:
50 to 600mm/sec
Print speed continuous:
Up to 800mm/sec depending on model
Back speed (intermittent):
600mm/sec
Text printing:
Any font and point size
Barcode printing:
All common barcode formats supported
2D code printing:
All common 2D and stacked code formats supported
Interfaces:
USB, Ethernet, serial and parallel
Ribbon size:
Up to 900m (98mm diameter) on 1-inch core depending on model
Ribbon winding:
Outside (inside optional)
Dimensions (53mm models):
204 x 182 x 235mm; 9.5Kg
Dimensions (107mm models):
204 x 182 x 290mm; 11Kg
Dimensions (128mm models):
204 x 180 x 310mm; 11.7Kg
Dimensions (controller):
251 x 96 x 207mm; 5.5Kg
Standard cable length:
2.5m
Electrical supply:
110-240Vac @ 50-60Hz
Environmental:
+5 to +40C at up to 80% humidity (non-condensing)
Air supply:
6 Bar min. oil and water-free
Software:
Labelstar Office LITE included. Other software available for advanced needs.
   

 

  • Dynacode-II system
  • Print unit
  • Touchscreen controller
  • Continuous bracket
  • Print mechanics
  • Print unit
  • Wide range of interfaces
  • Example mounting brackets
  • Packaging film
  • Packaging film
  • Packaging film
  • Packaging film
  • Packaging film

There are currently no videos available for this product.

 

 

 

 

 

 

 

 

 

More Information

Dynacode - standard coder series
Dynacode-IP - for harsh environments
Flexicode - low cost small area coder
DPM-IIIxi - intermittent coders


+44 (0)1543 502202
Send Enquiry